Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Taco iworx
Chad Reed
Member Posts: 5
Anybody have any thoughts on the taco iworks system? We were using the Uponor CCN system, which worked really well for us, but have had to switch because Uponor quit on their system. I liked the freedom that the Uponor system afforded when it comes to coding and the website wasn't bad either. Any advice will be welcomed.
0
Comments
-
CCN alternative
Might also check out the MrPEX IDC system (based on Climate Automation Systems.)0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements