Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

automatic water feeder vxt or mcdonnell

jonny88jonny88 Member Posts: 1,139
Hi ,in your experience which is the better product.My company uses mcdonnell miller but i was told they dont have a fail safe whereas the vxt does.in all dans books i have never heard him mention hydrolevel controls.

Comments

  • astoria2013astoria2013 Member Posts: 16
    M&M or Vxt

    Mcdonnell miller PS800 series does have a safety fault feature just like the vxt.  Its not as programmeable as the VXT, but all PS800 models have it.  I like the VXT cause they are much more programeable and have a digital water meter display on some models.  Very nice feature. 
  • SteamheadSteamhead Member Posts: 13,999
    Agreed

    we only use the VXT. 
    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc
  • jonny88jonny88 Member Posts: 1,139
    vxt i will give it a try

    thanks for the info.I always thought the mc donnell miller had a fail safe but a heating consultant in my supply house told me different.I tried their website but couldnt find a definite answer.Thanks again
  • Charlie from wmassCharlie from wmass Member Posts: 4,138
    I vote VXT

    the meter alone is worth it to learn a new control.
    Cost is what you spend , value is what you get.

    cell # 413-841-6726
    https://heatinghelp.com/find-a-contractor/detail/charles-garrity-plumbing-and-heating
This discussion has been closed.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!