Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
LWCO/FEEDER ISSUE

TLM
Member Posts: 38
I have a customer w a 7 yr old WM boiler- Hydrolevel 450 lwco and a M/M 101? auto feed. the lwco works when draining the excess water from the boiler. Problem is when I shut the power off to service the burner, the feeder feeds when I turn the power back on, regardless of water level and is overfeeding. I think the LWCO is faulty. Am I wrong?
There was an error rendering this rich post.
0
Comments
-
Doubt it
I have not personally had the problem as I hate auto feeders.
However here is a video of Gerry Gill explaining the issue I beleive you are seeing.
http://youtu.be/XsAG_cmv2IwSingle pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.
0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 971 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements