Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
NEED EDR FOR RADIATOR
Options
MIKEVICTORIA
Member Posts: 1
NEED SQUARE FEET STEAM PER WALL RAD TO SIZE BOILER.
THERE ARE 50 OF THESE WALL RADS WHICH MEASURE APPROX 2" DEEP,
18" WIDE & 24" HIGH IN A CHURCH EFFECTED BY SANDY.
PLEASE SEE ATTACHED PICTURE OF WALL RADIATOR.
THANKS
THERE ARE 50 OF THESE WALL RADS WHICH MEASURE APPROX 2" DEEP,
18" WIDE & 24" HIGH IN A CHURCH EFFECTED BY SANDY.
PLEASE SEE ATTACHED PICTURE OF WALL RADIATOR.
THANKS
0
Comments
-
Pic of a Pic
To me it is an odd radiator, but then the picture of a picture is pretty bad to look at. Can't you email the photo to yourself and upload it that way? Sorry for being so picky, but I think it might help.0 -
That is an H.B. Smith X Ray
HB Smith X Ray wall radiators. EDR PG 79 and 80........you need to determine if these are 1X3 sections, 1X4 sections...etc. I know they look like each panel is individual.....but they are not. How many are connected to each other? They come in 5 foot and 8 foot assemblies. Let me know and if you don't have the book EDR from this site, I can look it up for you.
Don0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 885 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements