Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Two Crane Questions
Greg Gibbs
Member Posts: 75
Does anyone still have push nipples available for Crane Cast-iron baseboard ?
This is a job in Denver, the whole house is being gutted, walls are moving.
If we can save the radiation we will.
Is that a shut off valve in the end cap?
The system is now plumbed with mono-flow tees. Greg Gibbs
This is a job in Denver, the whole house is being gutted, walls are moving.
If we can save the radiation we will.
Is that a shut off valve in the end cap?
The system is now plumbed with mono-flow tees. Greg Gibbs
0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 892 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements