bryant gas furnace, no heat..

roxy

Furnace quit on us and cant get repairman out till tomorrow... Its a bryant gas furnace 350aav. I cant figure out the led code as to what the problem may be, when I try to reset it it just blows cold air for about a minute then turns off. Please help!!

unclejohn

led code

That furnace should have a two diget code. The first number determined by the short flashes and the second number by the long flashes. So one long flash followed by 3 short flashes = error code 13

unclejohn

350aav

Didn't see and Bryant 350aav. There is a 350mav which is a 90%er. Sounds like you need and inducer motor or a circuit board.

Paul48

This?

http://www.docs.hvacpartners.com/idc/groups/public/documents/techlit/sm350aav-02.pdf

unclejohn

On partners

And still will only show me 350mva's

Paul48

can't

use my link?

unclejohn

I did

Just don't know why I can't get it my own self. Went to lit. then prod data put in 350 and only mva's come up.

Paul48

front, back, or side door

i searched 350aav and came up with.. http://www.catalog.bryant.com/wcs/proddesc_display/0,,CLI1_DIV42_ETI4641_PRD805_SIT70,00.html