Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
any Ideas for a snow melt system for a roof top deck
cochuck
Member Posts: 1
I have a project that an architect calls for a 3" to 4" concrete slab embedded with 3/4" Pex-Al tubing over EDPM or PVC membrane flat roof exterior deck . This would be tied in with a traditional snow melt system for a driveway powered by a Viessmann Vitodens. I cannot get approval from any membrane manufactures for this application. I was thinking of installing some sort of un-coupling mat over the membrane. Any ideas?
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements