Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Some more De-Knuckleheading
Options
JStar
Member Posts: 2,752
We just finished this repiping today. Going back tomorrow to install new main vents, and Vaporstat.
<a href="http://www.facebook.com/media/set/?set=a.431492586919989.95849.353747484694500&type=1">http://www.facebook.com/media/set/?set=a.431492586919989.95849.353747484694500&type=1</a>
<a href="http://www.facebook.com/media/set/?set=a.431492586919989.95849.353747484694500&type=1">http://www.facebook.com/media/set/?set=a.431492586919989.95849.353747484694500&type=1</a>
0
Comments
-
looks great.
Thats a nice header.gwgillplumbingandheating.com
Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.0 -
Screw Pipe:
You really know how to screw pipe.
There's never enough time to do it right. But always time for someone else to do it over.
Someone Else, that's impressive.0 -
Vents
We finished this job today. Installed two sets of two Gorton 2 vents. The mains went from 16 minutes hot to 3 minutes hot. Can't wait to see his new fuel bill.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 160 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 848 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements