Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Need help with replacement intermittent pilot on Crown boiler

Options
stevep
stevep Member Posts: 37
in Strictly Steam
I'm looking for a replacement intermittent ignition pilot assembly for our Crown boiler. I spoke with Crown on the phone and they gave me Crown part number 35-4700 and Honeywell part number Q348A1275 however neither is turning up any good results when I do a web search. I didn't see any markings on the existing pilot when I pulled it out last night to look at it.



I see that Pex Supply sells universal intermittent pilot assemblies which looks like what I need. The pictures on the website aren't the greatest but the batwing hood universal model looks like the closest match. Am I on the right track? I was hoping someone could help aim me in the right direction.



Crown model BSI138ENPZZPSU

Honeywell gas valve VR8204C6000
Homeowner

Comments

  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,576
    Options
    Pilot assembly

    Can you post a picture of the assembly so the pros here may recognize it, and tell you where it may be found.--nbcv
  • Enreynolds
    Enreynolds Member Posts: 119
    Options
    This is

    A diagram of that part #Q348A1275/B  from the Honeywell site.



    Eric
  • stevep
    stevep Member Posts: 37
    Options
    thanks

    Thanks guys. I'll take a picture of it when I get home tomorrow.
    Homeowner
This discussion has been closed.

Categories