Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Monitron aquastat settings
maubin
Member Posts: 11
Hi,
I have a electric boiler slant/fin Monitron for my infloor water radiant heat. I have 3 zone valves and 1 circ. pump. The aquastat has 2 dials, a HI and a LOW. The manual says to set the LOW LIMIT at 180F but doesn't mention anything about the HI setting other than saying to keep the limit thermostat closed?? ( are they talking about the HI dial?) What should be the LOW and the HI setting? I just can't figure this one out, thanks!
I have a electric boiler slant/fin Monitron for my infloor water radiant heat. I have 3 zone valves and 1 circ. pump. The aquastat has 2 dials, a HI and a LOW. The manual says to set the LOW LIMIT at 180F but doesn't mention anything about the HI setting other than saying to keep the limit thermostat closed?? ( are they talking about the HI dial?) What should be the LOW and the HI setting? I just can't figure this one out, thanks!
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements