Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Part Cross-Refererence

Jack Bakker
Jack Bakker Member Posts: 3
in Thermostats and Controls
Hello readers,



I have a friend of a friend who lives (too)far away has a really old system and thinks his L147A4K2 control is bad.



From what I can gather it's an antique (mercury switch?)  dry immersion-well high/low limit aquastat. It's on an oil fired HW system with a domestic HW tank(less coil?)



Without seeing it in person, I'm thinking a Honeywell L8124E1016 (or equivalent) will do the job as a replacement.



I'm trying to help troubleshoot this via text messaging, and have limited information about the system. I'm hoping for some pictures in the very near future, which should be a big help.



Thoughts?



Thanks,



Jack

Comments

  • billtwocase
    billtwocase Member Posts: 2,385
    they rarely

    go bad. It is a closed mercury bulb. You will need a well adapter and a L4006A if it is
This discussion has been closed.

Categories