Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Henry Ford museum radiators

John Mills_5
John Mills_5 Member Posts: 952
in THE MAIN WALL
Appears to be how they heat the joint. Not on the night I was there, the A/C was. 

Comments

  • Steamhead
    Steamhead Member Posts: 17,632
    Looks like the rad on the left

    has those pre-Monoflo tees- Eureka or similar.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    mattmia2
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,321
    Flow

    I'm thinking the flow was left to right, no?
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
This discussion has been closed.

Categories