Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
SINGLE MOM HEATING ISSUES
Options
WomanNeedsYourExpertise
Member Posts: 32
Furnace glowbar was out, replaced with a Honeywell Q3400A 1024 Flame Rod Kit, now the burners are closed and won't light.
Unit cuts on but burners won't light and air is not blowing from the vents. A/C works perfectfly. Please help. By the way this is an older unit. Thanks.
Here are some pics:
Unit cuts on but burners won't light and air is not blowing from the vents. A/C works perfectfly. Please help. By the way this is an older unit. Thanks.
Here are some pics:
0
Comments
-
Ignitor
Your going to need a tech ,he will be able to check you gas valve and board.0 -
Thank
you.0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements