Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Anyone know a gas burner approved for Burnham Megasteam?

in Gas Heating
Hi. I have a customer who has a Burnham Megasteam 629SL-sb 1.65 gph firing rate boiler. He wants to put on a gas burner. I just got off the phone with Carlin and they said since its a postive overfire pressure boiler, it needs a welded flange which they have not made yet? has anyone done a conversion burner on one of these yet?
Thanks
Joe
Thanks
Joe
0
This discussion has been closed.
Categories
- 80.9K THE MAIN WALL
- 2.5K A-C, Heat Pumps & Refrigeration
- 36 Biomass
- 394 Carbon Monoxide Awareness
- 2.6K Controls
- 1.4K Domestic Hot Water
- 3.7K Gas Heating
- 101 Geothermal
- 130 Indoor-Air Quality
- 2.3K Oil Heating
- 30 Pipe Deterioration
- 564 Plumbing
- 4.2K Radiant Heating
- 333 Solar
- 12.1K Strictly Steam
- 36 Water Quality
- 7 Industry Classes
- 51 Job Opportunities
- 7 Recall Announcements
Comments
You may want to start by reading the and o manual for the burnham mega steam...It clearly states, there position on converting from oil to gas. Read page 4 warnings and you will find your answer...ja
Hello Did you review the manufactures warnings and make your decision based on that....I am just wondering ? ja
there has recently been a "changing of the guard" at Burnham, so their perspective has changed. I don't know anything specific, but do know they are now listening to us. Keep mentioning this when you talk to Burnham's people.
"Reducing our country's energy consumption, one system at a time"
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Baltimore, MD (USA) and consulting anywhere.
https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc
Are you referring to the name Burnham to U S Boiler..I have attended several of there very recent info/training sessions and have not herd this...Like someone once said if it [aint] in writing you [aint[ got it..Last time I called to even ask, the tech guy referred me to that page and said if I even consider doing a conversion burner to take off the Burnham label and attaching part and seriel numbers...And put your own name on it....I got that....I understand the pros and cons but I always go by the book, on situations like this. ja
Hello I am wondering If you read the book and made a decision...Its always good ,when we hear back from people who ask questions...Just to see if we helped...