Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Vent-Rite No. 35 on mains???
openawindow
Member Posts: 1
i have two 2 1/2 mains one 20 feet and one 28 feet these are vented sadly of 90 elbows with vent-rite NO. 35's. not sure they will work for long being at the end of these runs. mains are currently uninsulated this will be insulated this winter and would like some flushing advise please. the radiators have vent rite no.1's and those look fine.
0
Comments
-
Add an offset
from the tee to bring the vent up and back from the end and get Gorton # 2 vent for each return.Cost is what you spend , value is what you get.
cell # 413-841-6726
https://heatinghelp.com/find-a-contractor/detail/charles-garrity-plumbing-and-heating0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 89 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements