Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
mono flow tee systems
AAVERY
Member Posts: 1
Q1
On a divert-er tee system can you vary elevations on the main piping or does it need to be level or pitched???
Q2
On a divert-er tee system how long can the branches be off the main is there a rule of thumb or a formula to calculate??
On a divert-er tee system can you vary elevations on the main piping or does it need to be level or pitched???
Q2
On a divert-er tee system how long can the branches be off the main is there a rule of thumb or a formula to calculate??
0
Comments
-
Diverter tee systems
http://www.heatinghelp.com/article-categories/331/Diverter-Tee-Hot-Water-Heating0 -
hah!
I was just reading through Dan's book "How Come". All of the info in the FAQ's is in there. Good info.0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 892 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements