Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Pneumatics question
Plumdog_2
Member Posts: 873
I'm new to pneumatics and want to know what Ox designates. (My guess is outside air sensor). This stuff is fifty years old or more and still works (with a little attention).
0
Comments
-
Need a bit more info...
"X" sometimes refers to a restrictor, outside air sensors are usually LP914's, and are designated by their insertion type; well, duct or through the wall mounting. It could also be a misprint of "Dx" which could mean direct expansion cooling, or a Direct Action (air-to-close) the valve or damper.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements