Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
plumber
Options
hi all hoping to have some questions addressed I have steam boiler with about 321sq ft of connected load, its ibr net rating is 358 sq ft. I would like to pull a FHW loop of about 26' of slant-fin 30 which i believe would equal about 13,650 btu in 2 separate zones ie 1st and 2nd floor. Also whats best way to have multiple zone FHW loop off the staem boiler use zone valves? with a main bronze pump almost like a manifold, or a separate pump for each zone. any help would be appreciated highly Thks
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements