Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
PM, Cleaning and inspection times for various boiler types
Ross Goldstein
Member Posts: 7
I am in the process of updating my estimation program and was told that I need to re-adjust the time it takes to do a proper pm, cleaning and start up on the following types of boilers-both oil, gas, propane if applicable
Atmospheric
Firetube
Watertube
Cleaver Brooks
Steam with condensate pumps
Is there any one willing to share the time they use to estimate for maintenance pms.
thank you
Ross
Atmospheric
Firetube
Watertube
Cleaver Brooks
Steam with condensate pumps
Is there any one willing to share the time they use to estimate for maintenance pms.
thank you
Ross
0
This discussion has been closed.
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 98 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 66 Pipe Deterioration
- 931 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements