Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

More photos of Buderus install

ScottMP
ScottMP Member Posts: 5,883
in THE MAIN WALL
Not sure if I showed these photos before, This job was done a few years ago and its been a few years since I have been here.

Sorry if you've seen these before but its one of the jobs I am proudest of.

Radiant, Indirect, cast iron baseboard and hydro-air.

Comments

  • David Sutton_6
    David Sutton_6 Member Posts: 1,079
    And you should be !!

    i remember that one and it still gives me goose bumps LOL, Thats sweet !!



    David

    aka DrPepper
  • Ron Jr._3
    Ron Jr._3 Member Posts: 605
    Wow , that is beautiful !

    I bet the homeowner shows that room off more than his trophy room !



    Is that red vessel a floor mounted expansion tank ?
  • ScottMP
    ScottMP Member Posts: 5,883
    Yes Ron

    Thats a floor mounted exspansion tank.
  • ScottMP
    ScottMP Member Posts: 5,883
    Yes Ron

    Thats a floor mounted exspansion tank.
  • bob young
    bob young Member Posts: 2,177
    photo

    wow, dave from canada was correct. you are a wizzard.
  • ScottMP
    ScottMP Member Posts: 5,883
    To be honest

    This was done by my crew ,,, but I help do the lay out and design,
  • R Mannino
    R Mannino Member Posts: 441
    Above

    my level of competency, that's for sure. Nice work!
  • jonny88
    jonny88 Member Posts: 1,139
    beautiful install

    fantastic work,very nice how you brought the pex into the manifolds.how do you price that job.
  • Ron Jr._3
    Ron Jr._3 Member Posts: 605
    Any problems with the floor mount ?

    There's always a big debate about which way to hang a regular expansion tank . You know we install them threads down most of the time . I've heard hanging it this way can cause the bladder to fail prematurely .



     Just wondering if you had any tank failures with the floor mount since the tapping is on the bottom of the tank , at the end of a dead end pipe .  
  • Paul48
    Paul48 Member Posts: 4,469
    Details

    I love the drip shield for the electronics.
  • ScottMP
    ScottMP Member Posts: 5,883
    Actually Paul

    We made the electrcian put that in ... I was a little ticked off where he put his controls and I told him so. Not our regular electrcian ..
  • jjwest
    jjwest Member Posts: 6
    Very Pretty But...

    I'll bet the ground doesn' t freeze on the other side of that wall anymore! Is that lumber treated? I had to find something wrong with it and it certainly isn't the pipework.
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,519
    Beautiful Scott

    I hope you made good money because you deserve every penny.  Mad Dog
    Consulting by Mad Dog & Matt Jr.
This discussion has been closed.

Categories