Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
New. looking for some help
hsimp
Member Posts: 1
Hi, Im an apprentice in my local Plumbers and Pipe fitters hall, I was looking for some books or online reading about modern pluming and heating. Hoping someone could point me in the right direction.
Thanks in advance
Thanks in advance
0
Comments
-
Start here...
http://www.heatinghelp.com/categories
I also think Dan sells John Siegenthalers "Modern Hydronic Heating of Residential and Light Commercial Buildings". which is a hydronics persons bible.
That, and hang out here and ask questions. This is one of THE GREATEST resources for information in the WORLD.
Welcome aboard.
METhere was an error rendering this rich post.
0 -
What ME said
and also you want to learn as much as you can about the old stuff. There are a LOT of old systems out there, and they're not going away anytime soon, plus they often work better than what's being installed today. Get into the heads of the Dead Men and you won't have much competition!All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 98 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 66 Pipe Deterioration
- 931 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements