Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Air problem
bigfolkes
Member Posts: 3
We inherited what may be an on going problem. We have a oil boiler with two Taco 007 with IFC on supply and keep getting air in system every couple of days now.The system is an older house with radiators and starts with a 3inch main that splits to 3-2 inch mains. We replaced a 007 circulator and have been getting air in system every couple of days. Before we changed circulator they where getting air in system. We bleed radiators and heat works for 2-3 days. Is 007 the correct circulator? or do we need some sort of air elimination on supply? We were thinking a spiral vent on the supply on the suction side of the circs. The owners are new to the house and I saw a tag that said another company replaced a circ. and had air problems.Give some feedback. Thanks
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements