Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Controls and wiring

in Controls
Ken Resnick will be conducting training on oil heating and gas heating controls and wiring at the Electrical Training Center located in Copiague , Long Island, New York.
The 80 + hour course will be on Saturdays starting February 11, 2012 and finishing May 19, 2012.
For further information you may contact : The Electrical Training Center located at 65 Elm Street , Copiague, NY . Phone : 631-226-8021 or on the website: <a href="http://www.electricaltrainingcenterli.com/">[u][color=#810081]www.electricaltrainingcenterli.com[/color][/u]</a>
The 80 + hour course will be on Saturdays starting February 11, 2012 and finishing May 19, 2012.
For further information you may contact : The Electrical Training Center located at 65 Elm Street , Copiague, NY . Phone : 631-226-8021 or on the website: <a href="http://www.electricaltrainingcenterli.com/">[u][color=#810081]www.electricaltrainingcenterli.com[/color][/u]</a>
He who knows WHY
Shall be master of
He who knows HOW
Shall be master of
He who knows HOW
0
This discussion has been closed.
Categories
- 80.9K THE MAIN WALL
- 2.5K A-C, Heat Pumps & Refrigeration
- 36 Biomass
- 394 Carbon Monoxide Awareness
- 2.6K Controls
- 1.4K Domestic Hot Water
- 3.7K Gas Heating
- 100 Geothermal
- 130 Indoor-Air Quality
- 2.3K Oil Heating
- 30 Pipe Deterioration
- 563 Plumbing
- 4.2K Radiant Heating
- 333 Solar
- 12.1K Strictly Steam
- 36 Water Quality
- 7 Industry Classes
- 51 Job Opportunities
- 7 Recall Announcements