Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
TRV adaptors
Gordan
Member Posts: 891
Does anyone know of a reasonably priced solution for adapting Danfoss RA2000 heads to M30x1.5 threaded TRV bodies? Danfoss' own 013G1360 goes for a pint of beer overseas, but here is apparently worth its weight in gold - that is, if you can even get it...
0
Comments
-
Oventrop
Oventrop makes 2 stylesof heads, the HD and LD. One fits on the ring, one fits the longer throated valve body or Buderus wall panel radiators. The DiaNorm radiators use the ring-style TRV head.0 -
Yep...
I'm pretty sure some of the older Honeywell heads are m30x1.5 too (T100), but I'd rather use an adaptor than buy whole new gear...0
This discussion has been closed.
Categories
- All Categories
- 86.1K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 85 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 155 Indoor-Air Quality
- 3.4K Oil Heating
- 62 Pipe Deterioration
- 905 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.7K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements