Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
GE Furnace blower motor 1/2hp 1050rpm ph1 115volts - $85
Options

QwertyHVAC
Member Posts: 2
I have an almost new blower motor out of a Rheem furnace. 4 speed,
1/2hp, 1050rpm 115volts single phase, 5.80amps.Shaft length 3 1/2".
Comes with 7.5/370 cap. GE part # 5KCP38KGR047 S. Rheem/Ruud part
#51-22873-01.Please email if interested. Thank you.
1/2hp, 1050rpm 115volts single phase, 5.80amps.Shaft length 3 1/2".
Comes with 7.5/370 cap. GE part # 5KCP38KGR047 S. Rheem/Ruud part
#51-22873-01.Please email if interested. Thank you.
0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 107 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 983 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements