Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Need specs and install manual for older Smith boiler
prhoades2
Member Posts: 1
Hello Everyone, I'm new here. I've been doing a lot of forum reading and have learned a lot from the postings. I am getting ready to take on the restoration of my single pipe steam system. First question I have is can anyone provide me with the specs on a Smith G210-S-4/W/6 steam boiler? Also, are Dans books on steam still available from here?
0
Comments
-
Literature
Try this: http://www.smithboiler.com/html/litlibrary.asp
I didn't find your model there, but the GB200 series might be similar. If the literature isn't helpful, try contacting the manufacturer.
Yes! Dan's books are still available here. Just click "Shop" at the left end of the menu bar above. Buy the ones you really need now and put the "nice-to-haves" on your Christmas list.Just another DIYer | King of Prussia, PA
1983(?) Peerless G-561-W-S | 3" drop header, CG400-1090, VXT-240
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements