Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Control Info for Republic Gas Conv Burner

Peter_S
Member Posts: 1
Does any one have info or wiring diagram for a Republic Gyroscopic Balance Gas Conversion Burner. Model R.. Serial C123240
I'm trying to figure what a connection at the base of the unit that was unplugged and jump wired is supposed to do.Also I need look at power source options during electrical outages.
I'm trying to figure what a connection at the base of the unit that was unplugged and jump wired is supposed to do.Also I need look at power source options during electrical outages.
0
Comments
-
That's been there for a while
the guy you want to get in touch with is Tim McElwain, who runs the Gas Appliance Training Center near Providence. I seem to remember he has some documentation on these things. Tim has been in the business over 40 years and is a fountain of knowledge on gas issues. His e-mail is timmcelwain@gastc.necoxmail.com .
But since the burner is that old, the boiler it is in must be even older. Maybe it's time to upgrade to a more-efficient unit?All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 102 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 936 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements