Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Oil fired heat appliance
x600
Member Posts: 6
two zone floor heat system (open system, we use floor water for domestic hot water) currently using a Bock 32E for hot water set to 120degF. there's 28 gal in the floor tubes.
would like some suggestions for a new and more efficient water heating appliance. Water temp won't ever exceed 120degF. the current system works okay but with oil going well above four bucks a gallon would like more efficiency. Thanks.
would like some suggestions for a new and more efficient water heating appliance. Water temp won't ever exceed 120degF. the current system works okay but with oil going well above four bucks a gallon would like more efficiency. Thanks.
0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 81 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 892 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements