Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Do it yourself radiant calcs
Options
E_e
Member Posts: 1
Does anyone have a resource to guide me thru the calculation/design (pex, pump sizing, ect) process for a domestic radiant system? I'd like to use a closed system with an on-demand tankless heat source. Main floor of house will have pex in floor joist bays, basement to have baseboard radiator units...
0
Comments
-
Sure Do
The yellow pages or google to find a heating pro in your area. There is also a contractor locator here at heatinghelp.There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements