Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Type 2 vs Type 3 sensors
Gary Jansen_4
Member Posts: 77
Can anybody explain to me the difference between these 2 types of sensors? I am familiar with the type 2 as we do a lot with Tekmar and that is what they use. Now I am looking at some Taco IWorks controls and they specify a type 3. Without getting into too technical a verbiage so I can understand what you are telling me, what is the difference and why would you use one over or in place of the other? Thanks, Gary
0
This discussion has been closed.
Categories
- All Categories
- 86.4K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 925 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements