Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Rad Renovation
Options
Paul Pollets
Member Posts: 3,671
We just finished the rough-in for a hydronic conversion using 16 Dianorm wall panel radiators and Myson toe-kick convector in the kitchen. We trimmed the LR radiators, as it's the only room in the home that is done in plaster. The homeowner wanted to preserve it. The rest of the home was gutted and expanded.
The boiler/water heater is a Triangle Tube PE110 with a Grundfos Alpha pump for the radiator circuit.
The "Woman of the Home" was acting as the GC. She was a delight to work with and knew what she wanted.
The boiler/water heater is a Triangle Tube PE110 with a Grundfos Alpha pump for the radiator circuit.
The "Woman of the Home" was acting as the GC. She was a delight to work with and knew what she wanted.
0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements