Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
skimming
Options
STEAM DOCTOR
Member Posts: 2,509
From where do I skim steam boiler that does not have a skim tapping? The choices are from the 67 LWCO, a T in the top nipple of the water glass, a T in the bottom nipple of the water glass or a T in the pressure relief valve nipple? All ideas are welcome and appreciated!
0
Comments
-
pressure relief
I beleive mot say from the pressure relief valve but it probably depends on the boiler. My guess is whatever the highest point is that has a decent size port.Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.
0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements
