Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Heating Alert

DanHolohan
DanHolohan Member, Moderator, Administrator Posts: 16,598
in THE MAIN WALL
<a href="http://www.heatinghelp.com/article-categories/310/Dahl-Valves">http://www.heatinghelp.com/article-categories/310/Dahl-Valves</a>
Retired and loving it.

Comments

  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,212
    Dahl

    I love Dahl products.  A little bit more expensive, but worth the cost.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,598
    They just started sending me press releases.

    I'm glad they did. Got all of these at the same time. 
    Retired and loving it.
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,212
    Dahl

    I remember them from trade shows.  They had a big table full of their valves; a big pile of them, stacked high and they were free for the taking. 



    And at the time, they bragged that they never had a stem packing leak.  Unbelieving me, I started using them and now I can say that I've never had a stem packing leak since using them.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
This discussion has been closed.

Categories