Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
I'm Back! With a Superstore question
Options
Landry Mechanical
Member Posts: 14
Hey guys, it's been a 3 year hiatus, but I'm back! Anyone notice the string of bad SSU 45's lately? I have had 2 in the last few months that where only about 6 months old leak right at the well weld. Starting to lose faith fast! I have been sticking to S120's or top performers and haven't had any issues, but a client is specking a SSU and I am leary.
-Ray Landry
-Ray Landry
There was an error rendering this rich post.
0
Comments
-
not lately
Generally the one's I have been getting are 1 to 2 years old. I hope it's not an issue since I just installed one at my Father inlaw's...0 -
Re SSUs and weld failures
I have only had one leaker about 2 mos ago that was appx 18 mos old. Leaked at the hot out nipple weld. I hope it is not a ongoing problem as I have quite a lot out there. Tim0
This discussion has been closed.
Categories
- All Categories
- 87.7K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 129 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 121 Geothermal
- 170 Indoor-Air Quality
- 3.8K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.6K Radiant Heating
- 396 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 17 Recall Announcements