Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Text Books for trade schools

Conlon
Member Posts: 1
Looking for suggestions for text books in our trade schools on basic hydronics and boilers. Modern Hydronics is a well known book. Are there any other suggestions out there?
0
Comments
-
The I=B=R manual
is a classic, mostly geared to residential, but the principles are the same. Hard to beat Siggy's book of course.
Eugene Silberstein has several on HVAC and refrigeration, also available under the Shop tab as well as others. Were I teaching a hydronics course, (and I have taught), I would use Siggy's book."If you do not know the answer, say, "I do not know the answer", and you will be correct!"
-Ernie White, my Dad0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 948 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements