Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
m&m 24v probe lwco and m&m 24 volt water feeder

ed wallace
Member Posts: 1,612
having a strange problem with a 24vprobe lwco and 24v auto water feed when lwco is activated the water feeder comes on after the dwell period and feeds water to proper level after another 2 minute period it feeds more water then after anither 2 minutes it adds more water I cleaned the probe and that did not solve problem so my question is could the probe be bad?
0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 426 Carbon Monoxide Awareness
- 113 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 161 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 994 Plumbing
- 6.3K Radiant Heating
- 391 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements