Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
stainless braided flex hose for hot-water radiator?
timo888
Member Posts: 137
Do they make a 1/2" stainless-steel braided or white-braided hose (more decorative than plain PEX) that provides the required oxygen barrier for use with a hydronic radiator, that could connect the radiator to the supply and return? The end connectors would be a standard 1/2" NPT thread. I've seen such braided hoses online with an EPDM liner but am not sure they are "oxygen barrier" rated for hydronic system use.
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements