Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Watts Flex Plate Graphite Heat Transfer Plates

Rob Blair
Rob Blair Member Posts: 227
in THE MAIN WALL
Anyone used them yet? 

Thoughts or comments?

Performance?

Thanks,

Rob Blair

Comments

  • meplumber
    meplumber Member Posts: 678
    Just put a some in.

    Have only been hot for a week.  Still playing with water temps.  I will let you know.
  • Rob Blair
    Rob Blair Member Posts: 227
    How easy was the installation

    Did they staple up like the brochures say?
  • meplumber
    meplumber Member Posts: 678
    Yes

    We used a pneumatic stapler.  Went up slick.  It was a retrofit to an old staple up radiant job running around 160 deg water temp.  Fine tuming the water temps now to hit a target floor temp.  We got it down to 135 deg.  Hoping to squeeze a few more degrees out of it.
  • Ross_7
    Ross_7 Member Posts: 577
    Watts

    Keep us posted, please. I would also like to hear how that perform for you. Final water temps, etc. Thanks in advance.
  • Rob Blair
    Rob Blair Member Posts: 227
    Meplumber

    Wanted to discuss installation times.

    Could you email me please.

    I sent you one today.

    Thanks,



    Rob
  • Rob Blair
    Rob Blair Member Posts: 227
    edited March 2011
    Meplumber

    Double Post, Sorry.



    Rob
  • sssr
    sssr Member Posts: 1
    How did the installation turn out?

    Just curious...considering an installation using these panels and wondering if they are worth the cost and effort?
This discussion has been closed.

Categories