Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
hi delta H model used for DHW
Big Will
Member Posts: 395
It has cast bronze headers but the tag shows a h9 model. The Raypack site shows this as a hydronic heater not volume water heater is a HW model. More importantly were is the low water cut of probe. I cant find it in the manual I printed of the net and I took the covers of the headers on both ends and did not see it. It keeps tripping on low water cut off. I am assuming the probe needs to be cleaned but I cant find the thing. A better tech manual with a parts blow up would be nice but I cant find one on their site. also there is no way to save the file to your hard drive that I could see just a print option. I did this but I am trying to keep a laptop with every pdf I look up on the hard drive for reference. I figure eventually I will have a good reference library behind the seat. I thought that there is a program that is like a print driver that will transfer things like that to the desk top.
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements