Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
drip return on one pipe
Epeter
Member Posts: 25
I added a drip return from the header (had been plugged).
Header and first sections of mains reverse flow...balance of mains parallel flow.
I piped it to the low point of the wet return.
I now have water level and hammmer issues.
What is the correct location for the drip return to connect.
Header and first sections of mains reverse flow...balance of mains parallel flow.
I piped it to the low point of the wet return.
I now have water level and hammmer issues.
What is the correct location for the drip return to connect.
0
Comments
-
Need Pictures
Hi- Post some pictures of the piping so we have a better idea of how it is configured.
- Rod0 -
Post a Photo
It would direct us to a solution .... First thought you may need it to trap it ..There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 75 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 93 Geothermal
- 150 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 921 Plumbing
- 6.1K Radiant Heating
- 373 Solar
- 15K Strictly Steam
- 3.3K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements