Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Roth Tank Capacity & Specs
D-man
Member Posts: 17
in Oil Heating
1) What is the <span style="text-decoration:underline;">effective</span> capacity of a Roth 275?
2) How far does the Roth Vent Alarm drop tube extend into the tank?
3) How far from the tank bottom are suction lines typically installed?
2) How far does the Roth Vent Alarm drop tube extend into the tank?
3) How far from the tank bottom are suction lines typically installed?
0
Comments
-
spcs
1 about 250-260 gallons
2 about 4 inches
3 about 2-3 inches0 -
Roth Tank
I installed a Roth 1000L/275 gal last spring - outside and put it in an enclosure that is insulated.
The one thing advised is to use a rigid suction tube from the top port and not the flexible tube/line.
Since mine is outside I installed a Rollie Tank Heater that has a SST heater element in the draw tube that extends to about 2" off the bottom.
So far very happy and the cost delta to the steel tank the Roth was $350 more. but should last a long time.0 -
Cost of Roth tank
How much would a 400 gallon Roth heating oil tank usually cost without installation?0 -
Cost of Roth tank
How much would a 400 gallon Roth heating oil tank usually cost without installation?0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements