Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
steam boiler "meltdown"
map
Member Posts: 1
Our 1 pipe 10 yr old steam boiler quit. The repair man said it was a meltdown and the whole boiler would need to be replaced. Supposedly was caused by a lack of maintenance which we did not know it needed. The elect. controls looked melted, but not the gas valve. Can this be true that we need a whole new boiler? Why not just replace the parts as needed. thank you! Map
0
Comments
-
Boiler Dry Fired
Hi- Generally if the boiler dry fired to the point where it got hot enough to melt the controls, there is damage to other parts and being a ten year old boiler it's not economical to even considered repairing. Post some photgraphs of your boiler and we could get a better idea of what happened.
- Rod0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 75 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 93 Geothermal
- 150 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 921 Plumbing
- 6.1K Radiant Heating
- 373 Solar
- 15K Strictly Steam
- 3.3K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements