Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Buffer tank control...
Options

kcopp
Member Posts: 4,577
What would be the best aquastat controller to use on a buffer tank that has a mod/con boiler driving it?
0
Comments
-
We used Tekmar
We used a Tekmar 261 to control two boilers and a buffer tank when a Taco SR502 or ZVC403 sent a boiler demand signal.
Unless I am mistaken, the use of an aquastat would mean the buffer tank constantly gets satisfied even when the zones arent calling.:NYplumber:0 -
you are correct...
Trying to wrap my head around the best controlling stategy... System has two zones. 1 w/ panel rads the other w/ Raupanel. 30 gallon buffer, and a Onex combi boiler.Trying to reduce the run time of the onex . Maybe I am missing the piont of the mod/con. ty,kpc0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 990 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements