Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Combustion Chamber Kit Installation
ACG
Member Posts: 8
I'm looking to have a Combustion Chamber Kit replaced in my Weil SGO Gold boiler. I know the kit costs about $100 and was quoted $450 for parts and installation. Is this a reasonable price?
Is this a job that a generally handy, but not professional heating person, such as myself can do?
Is this a job that a generally handy, but not professional heating person, such as myself can do?
0
Comments
-
it's surprising
that you need a chamber in a Gold Series. They are a much better design, and the target wall is protected pretty well from brushes, etc. It is an easy chamber to replace. Just unplug the burner, shut off the tank, and disconnect the line, and swing the door open. Although we don't get into pricing here, it sounds a little high to me for maybe an hours worth of work, unless it will also get a clean/service same time. Even then, still a little steep by my pricing.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements