Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Polaris used for Radiant?

MJS
Member Posts: 18
Does anyone have any experience using an American Water Heater Polaris for radiant and domestic hot water? <span>The model I'm thinking about is the: PG10 34-100-2NV. They have given me only a 27" wide cubby hole for a boiler room. The building is only 400 sq. ft. but they want lots of domestic hot water. The original plan was to cram in a Prestige Excellence, but now I'm worried about the Prestige short cycling with the small radiant heat load, not to mention fitting the beast in there. Thanks for any insight.</span>
<span> <a href="http://www.americanwaterheaternews.com/media/lit/polaris/Polaris_Brochure.pdf">http://www.americanwaterheaternews.com/media/lit/polaris/Polaris_Brochure.pdf</a></span>
<span> <a href="http://www.americanwaterheaternews.com/media/lit/polaris/Polaris_Brochure.pdf">http://www.americanwaterheaternews.com/media/lit/polaris/Polaris_Brochure.pdf</a></span>
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 948 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements