Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
PEX and Pretty Mechanical Rooms
Kevin_in_Denver_2
Member Posts: 588
I'm interested in seeing photos by anyone who has developed ways to use and support PEX and make it look very professional. Note, I believe a good mechanical room should have most of the hot pipes insulated and identified.
Please post photos so I can learn how to do this!
I admit I don't follow this forum religiously, or I may already have seen some good examples. I have seen nice installations of the manifold blocks, but those are relatively easy.
Please post photos so I can learn how to do this!
I admit I don't follow this forum religiously, or I may already have seen some good examples. I have seen nice installations of the manifold blocks, but those are relatively easy.
There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 99 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 66 Pipe Deterioration
- 932 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements