Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Vaporstat Settings
Steve_175
Member Posts: 238
Posted in the Strictly Steam section
( <a href="http://www.heatinghelp.com/forum-thread/133504/Advanced-Venting-Q">http://www.heatinghelp.com/forum-thread/133504/Advanced-Venting-Q</a> )
about some issues I am trying to iron out.
I got the Vaporstat, snubber, and low pressure gauge that were recommended. What should I set the Diff and Main on the Vaporstat to for one pipe steam?
BTW any body want to buy a Pressuretrol. Practically new, I am in the Boston area.
Make me an offer.
( <a href="http://www.heatinghelp.com/forum-thread/133504/Advanced-Venting-Q">http://www.heatinghelp.com/forum-thread/133504/Advanced-Venting-Q</a> )
about some issues I am trying to iron out.
I got the Vaporstat, snubber, and low pressure gauge that were recommended. What should I set the Diff and Main on the Vaporstat to for one pipe steam?
BTW any body want to buy a Pressuretrol. Practically new, I am in the Boston area.
Make me an offer.
0
Comments
-
Start with
a Main setting of 8 ounces and a Differential of 4. The system will run between 8 and 4 ounces. You have pretty good venting and it shouldn't need more than that.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements