Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Low Loss Header for Small System

Brad White
Brad White Member Posts: 2,399
in THE MAIN WALL
So I was looking for a low loss header for a small hydronic system I recently designed. This one is not the largest Taco makes, but a 6" #5900 'Flex Balance Plus' certainly makes a statement.



This system is an elementary school served by three DeDietrich oil-fired eutectic cast iron boilers moving about 460 gpm out to the system. I specified a pair of Taco's larger "007's" too. Those will be installed soon.



The second photo is a Taco KS for a different project, serving a chilled water plant for another school. The variable frequency drives behind them have their own zip code.
"If you do not know the answer, say, "I do not know the answer", and you will be correct!"



-Ernie White, my Dad

Comments

  • ScottMP
    ScottMP Member Posts: 5,883
    Pumps

    That would be a tough one to change on a Saturday night. " Gee, I think I have one of those on the truck".

    Nice work,

    Scott
This discussion has been closed.

Categories