Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

LWCO location on TT 110

Options
adambuild
adambuild Member Posts: 422
in THE MAIN WALL
We're in stalling our first TT 110 and need to install a RB24E LWCO for the inspector. What is the ideal location? Anyone have pics? Thanks, Adam

Comments

  • Gordan
    Gordan Member Posts: 886
    There's an auxiliary connection at the top of the boiler

    You're supposed to mount an autovent and a PRV there. Just below the vent would seem like a good location, since having water there should just about guarantee that the boiler is full. I'm planning on using that connection to also tee off for the expansion tank and the makeup feed. Disclaimer: just getting ready to install my first one, as well.
This discussion has been closed.

Categories