Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
new boiler

joeplumbs
Member Posts: 2
has anyone out there got any thoughts on that new HTP boiler that is a replacement unit that needs no primary secondary piping its modulating and 95 percent efficient. this looks like just the ticket for my older standing pilot one on a two zone baseboard application
0
Comments
-
HTP Boiler
Folks are pretty excited about it. It has a 6 to 1 turn down ratio.
As I understand it, the tank becomes like a hydraulic separate and takes the place of the secondary piping.
I think there is a primary pump on the boiler that pumps through the tank. The secondary piping to the system also pumps through the same tank. The idea is to keep the boiler hot so it doesn't condense as much.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements